Skip to content
SMALL GEAR. BIG POSSIBILITIES.Meet PBGGAME
YOUR WISHLIST (0)

Saved on this device.

SAVE YOUR NEXT MOVE

Tap the heart on any product to keep your training essentials together.

EXPLORE PRODUCTS
Gym Essentials

How to Clean a Shaker Bottle: Lids, Seals and Thorough Drying

Clean the cup, lid, threads and intended removable parts, then let them dry fully. Check the actual model before choosing a dishwasher or removing a seal.

Sources & editorial policy
Hands holding an open reusable bottle beside a kitchen tap.

To clean a shaker bottle, reach the cup, lid and drink-contact parts, rinse away the soap and let the components dry fully. Start with the care information for the actual model: the lid design, removable pieces and permitted washing method can differ between bottles.

Check the model before choosing the washing method

BlenderBottle's official care page illustrates why the exact model matters. It describes warm, soapy hand washing and gives dishwasher guidance for many of its components, while specifying hand washing for its insulated Radian model. It also recommends cleaning after use and storing dry bottles with the lid open for ventilation.

Those are that manufacturer's instructions. Read your own item's care information before choosing a dishwasher, removing a seal or treating two similar-looking lids alike. The NSF consumer guide to food-storage containers says not to put a container in the dishwasher unless it is identified as dishwasher-safe. When instructions are unavailable, its general approach is warm, soapy hand washing of the container and lid.

Work through shaker bottle cleaning in parts

Open the bottle normally and take out loose mixing pieces. Separate additional components only where the model's instructions identify them as removable. Then check the surfaces individually:

PartAreas to reach
CupThe interior, rim and accessible threads.
LidThe underside, drinking opening, flip-cover surfaces and threads.
Loose mixing ball or insertThe openings and surfaces that contact the drink.
A seal designed for removalThe seal and its seat, following the model's removal and refitting guidance.

NSF specifically highlights the gasket area and the groove where the lid meets the container. Wash the accessible areas thoroughly using the permitted method. Rinse away the soap, then allow all the components to dry completely.

Clean a protein shaker lid as several surfaces

The lid has more to check than its top surface. Look at where the drink leaves the bottle, where the cover closes and where the screw threads meet the cup. Opening a flip cover exposes a different area from removing the main lid.

Work with the parts your model is designed to expose. A seal that looks like a separate ring is not automatically intended to be pulled out. If removal is not described, check the manufacturer's information before trying to detach it. The aim is to reach the intended cleaning surfaces without turning a fixed assembly into loose parts.

For a bottle with a loose mixing ball, keep track of that separate piece as you wash the lid and cup. Its presence changes the parts you need to collect afterwards; it does not tell you which dishwasher method is permitted.

Let the components finish drying

Glasses, a mug and a bowl upside down in a kitchen draining rack, shown in black and white.
Glasses, a mug and a bowl resting upside down in a kitchen draining rack.

Give the washed pieces a place to drain and dry before closing the bottle. Check the lid's underside and the accessible recesses as well as the main cup; a dry outside does not tell you that a small recess has finished drying.

Keep the matching parts together while they are separated. That is particularly useful with a pair of similar bottles or more than one lid style. Refit only the components the model is designed to have removed, using its instructions, once cleaning and drying are complete.

A pair with separate plastic mixing balls

The PBGGAME curved-grip shaker-bottle pair contains two vessels with pink and white screw-on flip-spout lids, plus two separate plastic mixing balls. The selected Pink + White pair was listed at $8.99 when this article was prepared.

Keep each plastic mixing ball with its matching cup and lid during washing and drying.

Care information still needed for this bottle pair

PBG-993802: Pink + White pairCare detailBefore choosing a care method
Loose plastic mixing ballsTwo separate mixing balls are listedKeep track of each loose piece during normal opening and washing
Dishwasher useCheck the care label or ask PBGGAME for dishwasher guidance for the cups and lids.Use the written care guidance for this model
Seals and fixed lid partsCheck which parts are designed to detach and follow their removal and refitting instructions.Detach only the parts designed for removal; follow their refitting instructions
Approved washing and drying conditionsCheck the model-specific care label or ask PBGGAMECheck permitted cleaner, water conditions, drying and any excluded methods

Request the instructions through PBGGAME contact, quoting PBG-993802 and the Pink + White two-bottle configuration. The NSF guidance and BlenderBottle examples below explain what to check; they do not certify dishwasher use or removable seals on this pair.

Cong, PBGGAME fitness writer
ABOUT THE AUTHOR

Cong brings years of experience in the fitness industry and an in-depth interest in exercise research to practical guides on training, movement and equipment.

Meet Cong and explore his guides